| send us an inquiry |
LC3007 Hyamine 1622for surfactant tests |
| Order number | Packaging | Quantity | Price € |
| AC30007 | Plastic bottle | 250 g | 112.50 |
| Product information | |
| Synonyms | N-Benzyl-N,N-dimethyl-N-[4-(1.1.3.3-tetramethylbutyl)-phenoxyethoxyethyl]ammonium chloride, Benzethonium chloride |
| Hill Formula | C27H42ClNO2 |
| HS Code | 2923 90 00 |
| EC number | 204-479-9 |
| Molar mass | 448.08 g/mol |
| CAS number | 121-54-0 |
| Chemical and physical data | |
| Ignition temperature | 380 °C |
| Solubility | (20 °C) soluble |
| Melting point | 160 – 166 °C |
| Molar mass | 448.08 g/mol |
| Bulk density | 440 kg/m3 |
| pH value | 4.8 – 5.5 (10 g/l, H2O) |
| Vapor pressure | < - 0.001 hPa (25 °C) |
| Safety information | |
| R Phrase | R 22-34-50/53 Harmful if swallowed.Causes burns.Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| S Phrase | S 26-36/37/39-45-61 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).Avoid release to the environment. Refer to special instructions/ Safety data sheets. |
| Categories of danger | harmful, corrosive, dangerous for the environment |
| Hazard Symbol |  Corrosive Dangerous for the environment |
| Storage class | 8 A Combustible substances, corrosive |
| WGK | WGK 2 water endangering |
| Disposal | 3 Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C. |
| Transport information | |
| Declaration (transport by sea) IMDG-Code | UN 2923 CORROSIVE SOLID, TOXIC, N.O.S.(BENZETHONIUM CHLORIDE), 8 (6.1), III |
| Declaration (transport by air) IATA-DGR | UN 2923 CORROSIVE SOLID, TOXIC, N.O.S.(BENZETHONIUM CHLORIDE), 8 (6.1), III |
| Toxicological data | |
| Assay (HClO4) | LD50 rat 295 mg/kg |
| Specifications | |
| Assay (Perchloric acid titration, calc. on anhydrous substance) | ≥ 99.0 % |
| Identity (IR-spectrum) | conforms |
| pH (100 g/l, CO2-free water) | 5.0 – 6.5 |
| Residual solvents | excluded by production prozess |
| Water (according to Karl Fischer) | ≤ 4.0 % |
 |